Parts by Type

print This page

Flange Yokes

Filters: BRAND = Spicer,
PART NUMBER SERIES PILOT TYPE PILOT DIA. BOLT CIRCLE DIA. BOLT HOLE COUNT BOLT HOLE DIA. C/L TO FACE SWING DIA. JOINT ANGLE NOTES VEHICLE CLASS BRAND
250-2-15 SPL250 SERRATED 0.000 5.906 4 0.551 3.583 7.087 45 Rec Bolt Pattern / Part has serrated flange face - Active HD Spicer
170-2-15 SPL170 SERRATED 0.000 5.906 4 0.551 3.425 7.087 0 Rec Bolt Pattern / Part has serrated flange face HD Spicer
6-2-15 1710 SERRATED 0.000 5.118 4 0.472 3.189 8.000 0 Rec Bolt Pattern, 150mm flange w/ serrated flange face
 HD Spicer
6-2-25 1710 SERRATED 0.000 5.906 4 0.590 3.268 7.087 0 180mm Flange w/serrated flange face HD Spicer
170-2-35 SPL170 SERRATED 0.000 5.906 4 0.551 4.311 7.087 180mm Flange w/serrated flange face HD Spicer
250-2-10491 SPL250 SERRATED 0.000 5.906 4 0.591 3.583 6.880 HD Spicer
2-2-1679 1310 M 1.811 3.340 4 0.406 1.770 4.150 12 Sq Bolt Pattern / Same as our part number 3102-15. This is used on Toyota truck applications. It is a 1310 version of our part number 1302-15. LD Spicer
2-2-02768 1330 M 1.811 3.674 4 0.482 1.653 5.118 Replaced 5002768 LD Spicer
2-2-2029 1310 M 1.968 3.740 4 0.478 1.780 4.740 0 LD Spicer
2-2-939 1310 F 2.000 3.500 4 0.500 1.650 4.500 0 Square Bolt Pattern / Used on Ford car and truck applications 1990 and ealier. LD Spicer
2-2-1049 1210 F 2.000 3.500 4 0.484 1.625 4.360 20 Sq Bolt Pattern / Fits up to early 90's Ford Ranger and Bronco II. LD Spicer
3-2-1819 1410 F 2.000 4.250 4 0.500 1.625 5.240 0 Square pattern, Ford trucks with hole in center. LD Spicer
2-2-1379 1310 F 2.000 4.250 4 0.484 1.625 5.219 19 Sq Bolt Pattern / Fits Ford cars (Mustang, T-Bird, and others), trucks Ranger and possible the Explorer. It also fits the Mazda pickup from 1996 and later. LD Spicer
3-2-1619 1350 F 2.000 4.250 4 0.410 1.625 5.250 0 M12-1.75 holes, square pattern LD Spicer
4102-1819 1410 F 2.000 4.250 4 0.500 1.625 5.240 0 Square pattern, Ford trucks with hole in center. LD Spicer
2-2-1989 1310 F 2.162 3.937 4 0.489 1.930 4.906 Sq Bolt Pattern / Part has hole thru center. Bolt holes are equally spaced. Dodge LD Spicer
2-2-1879 1330 F 2.162 3.937 4 0.489 1.930 4.960 0 Same as PTI version 3302-1879 LD Spicer
2-2-899 1210 M 2.250 2.750 4 0.328 1.484 3.406 0 Rec Bolt Pattern / Same as 1202-39 but in 1210 Series. Fits Nissan cars and trucks up to about 1986. Then they used the 1202-20 and 1202-21. LD Spicer
10-2-29 1000 M 2.250 2.750 4 0.312 1.562 3.375 0 Rec Bolt Pattern LD Spicer
2-2-1609 1310 M 2.375 3.125 4 0.406 1.625 3.875 0 Rec Bolt Pattern LD Spicer
2-2-459 1310 M 2.375 3.125 4 0.375 1.625 3.875 30 Rec Bolt Pattern LD Spicer
2-2-329 1310 M 2.375 3.125 4 0.375 1.375 3.875 20 Rec Bolt Pattern LD Spicer
2-2-389 1310 F 2.375 3.125 4 0.375 1.375 3.875 20 Rec Bolt Pattern LD Spicer
5006832 1310 M 2.375 3.346 4 0.406 1.516 4.160 Proprietary to Ford (See PTI # 3102-232) LD Spicer
2-2-01474 1330 F 2.436 4.250 4 0.487 1.618 4.165 Sq Bolt Pattern / Dodge
3"x 3"Square		 LD Spicer
2-2-1799 1310 M 2.559 3.750 4 0.406 1.772 4.625 0 1310 version of 1202-255 LD Spicer
3-2-1879 1350 F 2.559 4.250 4 0.500 1.618 5.250 0 Sq Bolt Pattern / Part has hole thru center. LD Spicer
2-2-1519 1310 M 2.559 3.346 4 0.406 1.766 4.158 0 Isuzu LD Spicer
2-2-02313 1330 F 2.559 4.250 4 0.500 1.618 5.360 Square BC LD Spicer
5004617 1410 F 2.559 4.250 4 0.500 1.618 0.000 0 Oem only, Proprietary to Nissan. LD Spicer
3-2-1699 1350 F 2.680 4.250 4 0.410 1.625 5.250 0 Sq Bolt Pattern / Bolt holes are M12-1.75 threaded. Ford 4x4 Trucks usually located at the rear output of the transfer case. If you want to convert the driveshaft to a CV type use our part number 3502-42. LD Spicer
3-2-1719 1480 F 2.680 4.250 4 0.410 1.800 5.875 12 Sq Bolt Pattern / M12-1.75 threaded holes in flange LD Spicer
3-2-1709 1410 F 2.680 4.250 4 0.410 1.625 5.352 12 Proprietary to Ford. Use 4102-1709 LD Spicer
4802-1769 1480 F 2.680 4.250 4 0.509 1.800 5.354 19 Sq Bolt Pattern / Drilled Holes. Part has hole thru center LD Spicer
3-2-439 1410 M 2.750 3.750 4 0.438 1.938 4.625 30 Rec Bolt Pattern LD Spicer
3-2-159 1410 M 2.750 3.750 4 0.438 1.688 4.625 22 Rec Bolt Pattern / Sometimes used to increase the shaft size on a Corvette. LD Spicer
2-2-479 1310 M 2.750 3.750 4 0.438 1.375 4.625 20 Rec Bolt Pattern LD Spicer
2-2-489 1330 M 2.750 3.750 4 0.438 1.562 4.625 0 Rec Bolt Pattern LD Spicer
2-2-1209 1330 M 2.750 3.750 4 0.438 1.562 4.625 0 Rec Bolt Pattern LD Spicer
3-2-809 1350 M 2.750 3.750 4 0.438 1.281 4.500 15 Sq Bolt Pattern / Used on Corvette half shafts until 1997. Has a hole in the center to allow nut clearing on stub axle. LD Spicer
3-2-119 1350 M 2.750 3.750 4 0.438 1.562 4.625 20 Rec Bolt Pattern / Widely used on multiple applications, industrial, auto, etc. LD Spicer
3-2-1329 1410 M 2.750 3.750 4 0.484 1.688 4.234 0 Rec Bolt Pattern LD Spicer
3-2-299 1410 F 2.750 3.750 4 0.438 1.688 4.625 0 Rec Bolt Pattern LD Spicer
3-2-1639 1410 M 2.750 3.750 4 0.484 1.938 4.718 0 Proprietary to John Deere LD Spicer
3-2-1839 1410 F 2.953 4.750 4 0.500 2.000 5.750 0 Sq Bolt Pattern / Hole in center LD Spicer
3-2-1859 1350 F 2.953 4.750 4 0.500 1.750 5.750 0 Sq Bolt Pattern / Hole in center LD Spicer
3-2-1869 1480 F 2.953 4.750 4 0.510 2.000 5.850 0 Sq Bolt Pattern / Hole in center LD Spicer
2-2-03489 1330 F 2.953 4.750 4 0.500 1.730 5.875 LD Spicer
3-2-1159 1410 F 2.954 3.996 8 0.394 2.531 4.724 0 Metric flange LD Spicer
3-2-1549 1410 M 3.149 3.938 4 0.484 1.690 5.453 0 Rec Bolt Pattern / Bolt holes are on 36 degrees LD Spicer
4-2-1159 1550 F 3.375 6.124 8 0.509 2.000 7.000 LD Spicer
90-2-29 SPL90 F 3.544 5.118 8 0.478 3.281 5.906 0 Metric flange HD Spicer
3-2-709 1410 F 3.562 5.500 4 0.438 1.844 6.375 14 Rec Bolt Pattern LD Spicer
3-2-1789 1410 M 3.750 4.750 4 0.509 2.000 5.750 0 Sq Bolt Pattern LD Spicer
3-2-939 1410 M 3.750 4.750 4 0.531 2.000 5.812 0 Rec Bolt Pattern LD Spicer
3-2-559 1410 M 3.750 4.750 4 0.500 1.500 5.875 12 Rec Bolt Pattern LD Spicer
3-2-549 1410 M 3.750 4.750 4 0.500 1.750 5.875 20 Rec Bolt Pattern LD Spicer
3-2-429 1410 M 3.750 4.750 4 0.500 2.000 5.875 30 Rec Bolt Pattern LD Spicer
2-2-579 1310 M 3.750 4.750 4 0.507 1.375 5.750 20 Rec Bolt Pattern LD Spicer
4-2-1149 1550 M 3.750 4.750 4 0.484 1.500 5.750 0 Rec Bolt Pattern / Active LD Spicer
4-2-759 1550 F 3.750 4.750 4 0.500 1.500 5.875 8 Rec Bolt Pattern
 LD Spicer
4-2-679 1550 M 3.750 4.750 4 0.500 1.500 5.875 8 Rec Bolt Pattern
 LD Spicer
3-2-489 1480 M 3.750 4.750 4 0.500 1.500 5.875 8 Rec Bolt Pattern
 LD Spicer
3-2-479 1480 M 3.750 4.750 4 0.500 2.000 5.750 20 Rec Bolt Pattern
 LD Spicer
3-2-609 1480 M 3.750 4.750 4 0.500 2.000 5.875 26 Rec Bolt Pattern
 LD Spicer
4-2-669 1550 M 3.750 4.750 4 0.512 2.000 5.774 22 Rec Bolt Pattern
 LD Spicer
4-2-829 1550 F 3.750 5.250 8 0.453 2.500 6.156 0 LD Spicer
3-2-1779 1410 M 3.750 4.750 4 0.480 1.750 5.094 0 LD Spicer
4-2-849 1550 F 3.750 5.500 8 0.453 2.500 6.412 LD Spicer
3-2-1659-1 1410 F 4.803 5.750 4 0.484 2.000 6.750 20 Bearing strap style yoke with brake pilot and bolt pattern LD Spicer
5-2-989 1610 M 5.312 6.125 8 0.375 1.875 6.875 0 Flange has pilot for brake HD Spicer
5-2-599-1 1610 M 5.312 6.125 8 0.375 2.750 6.875 0 B.S./H.R.style w/brake pilot. HD Spicer
5-2-599 1610 M 5.312 6.125 8 0.375 2.750 6.875 0 Flange has pilot for brake HD Spicer
90-2-49-1 SPL90 M 5.312 6.125 8 0.375 2.750 6.688 0 B.S./H.R.style w/brake pilot. HD Spicer
3-2-909 1480 M 5.312 6.125 8 0.386 1.938 6.875 20 Flange has pilot for brake LD Spicer
4-2-699 1550 M 5.312 6.125 8 0.386 2.000 6.875 0 Flange has pilot for brake LD Spicer
4-2-1109 1550 M 5.312 6.125 8 0.406 2.000 6.875 0 LD Spicer
5-2-1089 1610 F 5.375 6.125 8 0.375 1.875 6.875 0 Part has opening cast thru web HD Spicer
5-2-249 1610 F 5.375 6.125 8 0.375 2.750 6.875 0 HD Spicer
5-2-709 1610 M 6.435 7.250 8 0.375 2.750 8.000 0 Flange has pilot for brake HD Spicer
140-2-39-1 SPL140 M 6.437 7.250 8 0.381 2.952 8.000 HD Spicer
90-2-39-1 SPL90 M 6.438 7.250 8 0.375 2.750 8.000 0 B.S./H.R.style w/brake pilot. HD Spicer
6-2-789 1710 M 6.438 7.250 8 0.375 3.000 8.000 0 Flange has pilot for brake HD Spicer
6-2-1439-1 1710 M 6.438 7.250 8 0.375 3.000 8.000 0 B.S./H.R.style w/brake pilot. HD Spicer
6-2-1219 1710 M 6.438 7.250 16 0.438 3.000 8.000 0 Flange has pilot for brake HD Spicer
100-2-169-1 SPL100 M 6.438 7.250 8 0.375 2.750 8.000 HD Spicer
90-2-19 SPL90 M 6.624 6.124 8 0.375 3.280 6.688 0 HD Spicer
5-2-379 1610 M 6.625 6.125 8 0.375 1.875 6.875 8 HD Spicer
4-2-689 1550 M 6.625 6.125 8 0.375 2.000 6.875 22 Flange has pilot for brake LD Spicer
5-2-279 1610 M 6.625 6.125 8 0.375 2.750 6.875 22 HD Spicer
3-2-499 1480 M 6.625 6.125 8 0.386 2.000 6.875 20 LD Spicer
3-2-309 1410 M 6.875 6.125 8 0.375 2.000 6.875 0 Brake pilot LD Spicer
8-2-119 1880 M 7.000 8.250 8 0.625 2.500 9.562 8 HD Spicer
8-2-109 1880 M 7.000 8.250 8 0.625 3.500 9.562 22 HD Spicer
5-2-619 1610 M 7.750 7.250 8 0.375 1.875 8.000 8 Part has opening cast thru web HD Spicer
6-2-769 1710 M 7.750 7.250 8 0.375 2.000 8.000 8 HD Spicer
90-2-69-1 SPL90 M 7.750 7.250 8 0.375 2.750 8.000 0 Bearing strap/half round style HD Spicer
5-2-629 1610 M 7.750 7.250 8 0.375 2.750 8.000 22 HD Spicer
6-2-1239 1710 M 7.750 7.250 8 0.375 3.000 8.000 0 Bolts rotated 22.5 degrees for brake applications HD Spicer
6-2-749 1710 M 7.750 7.250 8 0.375 3.000 8.000 22 HD Spicer
6-2-749-1 1710 M 7.750 7.250 8 0.375 3.000 8.000 22 Part has opening cast thru web HD Spicer
140-2-99-1 SPL140 M 7.750 7.250 8 0.375 3.070 8.000 0 Mates with std. 1710 series companion flange - Active HD Spicer
170-2-49 SPL170 M 7.750 7.250 8 0.378 3.208 8.000 30 Mates with std. 1710 series companion flange - Active HD Spicer
6-2-839 1710 M 7.750 7.250 12 0.438 2.000 8.000 8 HD Spicer
6-2-1349 1710 M 7.750 7.250 8 0.438 2.500 8.000 0 Part has opening cast thru web HD Spicer
6.5-2-359 1810 M 7.750 7.250 12 0.438 2.594 8.125 12 HD Spicer
6-2-1159 1710 M 7.750 7.250 8 0.438 3.000 8.000 0 Part has opening cast thru web HD Spicer
6-2-779 1710 M 7.750 7.250 12 0.438 3.000 8.000 0 Flange has pilot for brake HD Spicer
6-2-739 1710 M 7.750 7.250 8 0.438 3.000 8.000 22 HD Spicer
6-2-739-1 1710 M 7.750 7.250 8 0.438 3.000 8.000 22 HD Spicer
6-2-779-1 1710 M 7.750 7.250 12 0.438 3.000 8.000 0 Flange has pilot for brake; Bearing strap/half round style HD Spicer
6.3-2-19 1760 M 7.750 7.250 12 0.438 3.375 8.000 30 HD Spicer
6.5-2-329 1810 M 7.750 7.250 12 0.438 3.375 8.000 30 HD Spicer
6.3-2-19-1 1760 M 7.750 7.250 12 0.438 3.375 8.000 30 Bearing strap/half round style HD Spicer
6.5-2-329-1 1810 M 7.750 7.250 12 0.438 3.375 8.000 30 HD Spicer
250-2-49-1 SPL250 M 7.750 7.250 12 0.440 3.524 8.000 0 Half round metric flange HD Spicer
170-2-19 SPL170 M 7.750 7.250 12 0.441 3.208 8.000 30 Mates with std. 1810 series companion flange HD Spicer
170-2-39-1 SPL170 M 7.750 7.250 12 0.479 3.375 8.000 30 Half round metric flange HD Spicer
250-2-39-1 SPL250 M 7.750 7.250 12 0.479 3.524 8.000 30 Half round metric flange HD Spicer
170-2-59-1 SPL170 M 7.750 7.250 12 0.440 3.386 8.000 0 HD Spicer
6-2-759 1710 M 8.000 7.250 8 0.375 3.000 8.000 0 Flange has pilot for brake HD Spicer